FABIA 2000 ³ Body Work
Self-diagnosis for convenience system with CAN databus cable Edition 01.05
S00.5319.15.20
01-2 page 16
01
Test table for convenience system with CAN databus cable
Display group 001
Display group number 002
Display
field
Readout on dis-
play
Denomination Rectifying fault
1 autom. closing
man. closing
man. opening
autom. opening
not activated
Central switch for window lifter:
switch for window lifter DS
– Visual inspection of the cable guide.
– Check window lifter switch for correct fit-
ting and tightness.
– Check the correct fitting and tightness of
the plug connections of the relevant cir-
cuit while observing the display. If the
display content does not change during
activation, rectify fault or replace the rel-
evant component.
– Erase fault memory.
– Perform a functional test.
– Interrogate the fault memory again.
– Only operational with the ignition
switched on.
2yes
no
WL thermo fuse DS
1)
1)
yes- thermo fuse active (system disconnected), no- thermo fuse not active (system in operation)
3on
off
not fitted
Child safety catch switch
Display
field
Readout on display Denomination Rectifying fault
1 autom. closing
man. closing
man. opening
autom. opening
not activated
Central switch for window lifter:
switch for window lifter FPS
– Visual inspection of the cable guide.
– Check window lifter switch for correct fit-
ting and tightness.
– Check the correct fitting and tightness of
the plug connections of the relevant cir-
cuit while observing the display. If the
display content does not change during
activation, rectify fault or replace the rele-
vant component.
– Erase fault memory.
– Perform a functional test.
– Interrogate the fault memory again.
2 man. closing
man. opening
not activated
not fitted
Central switch for window lifter:
switch for window lifter RR
3 man. closing
not activated
man. opening
not fitted
Central switch for window lifter:
switch for window lifter RL
To Next Page
Loading...
Need help?
General
