General information8
ated by touching the screen. Active fields, which call up a function or a
menu, are called “function buttons” / .
The following information is displayed in the main menu:
the selected radio station (its frequency or designation);
selected waveband;
activation for the reception of traffic reports;
current menu.
“Pop-up window”
If you press the function key on the screen, a so-called “pop-up window” will
open where all possible set-up options are displayed.
Briefly press the desired set-up option. The pop-up window will disappear and the
newly selected set-up option is displayed in the function key.
“Check box”
Some functions can only be switched on or off.
There is a so-called “check box” in front of a function which can only be switched
on or off. A tick in the check box 7 indicates that the function is switched on, an
empty check box 8, indicates that it is switched off.
Briefly press the corresponding function key for switching on or off.
Input mask for free text input
In some of the menus you can enter a free text, for example, when
entering a new destination or while searching for the name of a point of
interest.
– Press to accept a character sequence offered by the system or
press in order to delete the characters in the entry line.
– When in the entry window, press on a character shown on the keypad
block to accept it into the entry line.
– You can also delete or change the character sequence in the entry line
as well as insert additional characters.
Further input possibilities:
- changes from upper case to lower case and vice versa.
- opens the input mask for digits and special characters. The function key
changes to . Press , to change again to the letter input mask.
- space key for entering spaces.
or - moves the character entry cursor (the cursor) in the entry line to the left
or right.
- opens a pop-up window with special characters.
To Next Page
Loading...
Need help?
General
