SKS-Kinkel Elektronik GmbH
Support-Hotline: +49 (0) 2661 98088 112
E-Mail: support@sks-kinkel.de
Dokument Art. No. 97010601
5.2 Changing the housecall melody
Press and hold the button to listen to all melodies of the housecall melody type.
When the desired melody sounds, release the button
5.3 Changing the floorcall melody
Press and hold the button to listen to all melodies of the floorcall melody type.
When the desired melody sounds, release the button
There is a choice of 8 ringtones for the house call and 4 ringtones for the floor call. The ringtone for
the house call signals that the intercom has been activated at the door bell/station at the front door
outside. The floor ringtone signals that the intercom has been activated at the door bell/station
located on the floor inside the building.
5.4 Changing ringtone volume
Pressing the button repeatedly increases the volume step by step.
Pressing the button repeatedly decreases the volume step by step.
Press the button with the speaker key for about 5 seconds in order to mute the indoor station. An
acoustic signal will confirm that the process has been completed successfully. In addition, the
door open key will flash at five second intervals.
To deactivate the silent mode press the speaker key again. An acoustic signal will confirm that
the process has been completed successfully.
Please note that the sleep mode is automatically deactivated after 12 hours or after a power failure.
To Next Page
Loading...
Need help?
General