18
Body Repair
The styrofoam shell is designed to absorb
damage from crashes and impacts, but in
doing so it can develop cracks and tears
over time. The easiest way to repair the
shell is to use any kind of light, clear tape
to reconnect and seal the crack.
Rotor Replacement
The quadcopter comes with 4
replacement rotors, to be used if the
originals are broken or badly damaged.
To replace a rotor, use a small Phillips
head screwdriver and remove the screw
connecting the rotor to the electric motor
shaft. Remove the damaged rotor and
replace with a new one, then screw it
back into place on the motor shaft.
REMINDER: It is extremely important
to use the correct rotor (A or B) for
replacement. Using the incorrect rotor
will cause the quadcopter’s flight to
be erratic and impossible to control.
The marking can be seen on the top of
the rotor.
In the event that the quadcopter absorbs light damage that renders flight difficult,
but not impossible, the following repairs are easy to perform and should get the
quadcopter back to a flyable condition.
REMINDER: Pilots are responsible for any damage caused by improper use.
Repair
To Next Page
Loading...