Sky Hub - Plug in Your Sky Hub; Connect Microfilter to Master Socket; Connect DSL Cable; Connect Power

4 5
Plug in your Sky Hub
1. Plug the Sky Master
Microfilter directly
into your master
phone socket.
3. Plug the blue end
of the black power
cable into the blue
port of your Sky Hub.
Plug the other end
directly into the
mains and switch on.
Continue to page 8 >
2. Plug one of the
purple ends of the
grey DSL cable into
the purple port of
your Sky master
microfilter.
Plug the other purple
end into the purple
port of your Sky Hub.
Help on page 12
If you previously
removed a phone
cable , Sky Box
cable or splitter ,
plug it back into the
port marked Phone.
Phone cable
or Sky Box cable
or Splitter with
Phone + Sky Box
4. Fit the new Sky
Microfilter to another
phone socket in use
in your home.
You must fit new Sky
Microfilters to all the
phone sockets in use
around your home.
Help on page 12
For best performance leave your Sky Hub permanently
switched on. Your Sky Hub may feel warm from time to
time, this is perfectly normal and no cause for concern.
Avoid plugging into a
mains extension block as
it reduces performance.