Sky Hub - Connect to Your Network; Find and Select Wireless Network; Enter Wireless Password

12 13
Plug in
How do I plug in a telephone splitter?
Plug in your splitter to the microfilter port marked Phone,
then connect your phone, Sky Box or other devices to
the splitter. If you have a pre-filtered master socket, plug
in your splitter to the right hand
side port.
Fit microfilters
How do I fit Sky Microfilters to my phone sockets?
Microfilter &
Phone
Microfilter &
Sky Box
Help
Microfilter &
Sky Box + Phone
If you have more than one of the above in use in
your home please call Sky on 0818 762 917 for
additional Sky Microfilters.
Getting the best broadband
Connect your Sky Hub to your master socket, because
that’s where your broadband signal is strongest. Page 2
If you have a standard master phone socket, fit Sky
Microfilters to all the phone sockets being used in
your home. Page 5
Replace all old microfilters with your new ones. Page 5
If you have a pre-filtered master phone socket, you
don’t need to use Sky Microfilters in any of your phone
sockets. Page 6
Always leave your Sky Hub switched on. Page 4 or 7