SkyBell HD - Connecting to SkyBell Wi-Fi

Step 5
In Sync Mode the SkyBell device creates a
temporary ad-hoc Wi-Fi network. The SkyBell app
connects to this Wi-Fi network to configure the
SkyBell device. Connect to the SkyBell device's
Wi-Fi network by following these simple steps:
• Navigate to your smart device's Wireless &
Networks Settings screen by pressing the
navigation icon button at the bottom of the
screen.
A similar screen to the one below will be
displayed.
Step 6
• Enable Airplane mode by tapping the toggle
control.
• Return to the SkyBell app by pressing the Back
button on your smart device.