Need help?Do you have a question about the SkyBell HD and is the answer not in the manual?
Log in to the SkyBell app or proceed if no device is attached to your account.
Ensure the SkyBell device is in Sync Mode with the LED blinking red/green.
Connect to the SkyBell's temporary Wi-Fi network and enable Airplane mode.
Turn on your smart device's Wi-Fi and select the SkyBell network from the list.
Select your home Wi-Fi network and proceed to enter its password.
Disable Airplane mode and return to the SkyBell app to finalize setup.
Observe LED status changes and confirm successful setup in Call mode.
Sign in to the SkyBell app using your account credentials or create a new account.
Put the SkyBell device into Sync Mode by ensuring its LED blinks red/green.
Leave the SkyBell app, launch Settings, and navigate to Wi-Fi to connect.
Tap the SkyBellHD_XXXXXXXX network to connect to the device's Wi-Fi.
Select your home Wi-Fi network and enter its password for the SkyBell.
Observe configuration progress and confirm successful sync with the Success screen.
Grant the SkyBell app access to the device's microphone for visitor audio.
Log in to the SkyBell app or proceed if no device is attached to your account.
Ensure the SkyBell device is in Sync Mode with the LED blinking red/green.
Connect to the SkyBell's temporary Wi-Fi network and enable Airplane mode.
Turn on your smart device's Wi-Fi and select the SkyBell network from the list.
Select your home Wi-Fi network and proceed to enter its password.
Disable Airplane mode and return to the SkyBell app to finalize setup.
Observe LED status changes and confirm successful setup in Call mode.
Sign in to the SkyBell app using your account credentials or create a new account.
Put the SkyBell device into Sync Mode by ensuring its LED blinks red/green.
Leave the SkyBell app, launch Settings, and navigate to Wi-Fi to connect.
Tap the SkyBellHD_XXXXXXXX network to connect to the device's Wi-Fi.
Select your home Wi-Fi network and enter its password for the SkyBell.
Observe configuration progress and confirm successful sync with the Success screen.
Grant the SkyBell app access to the device's microphone for visitor audio.
General| Video Resolution | 1080p |
|---|---|
| Field of View | 180 degrees |
| Night Vision | Yes |
| Motion Sensor | Yes |
| Two-Way Audio | Yes |
| Wi-Fi Connectivity | 2.4 GHz 802.11 b/g/n |
| Power Source | Hardwired |
| Weather Resistance | Yes |
| Compatibility | iOS, Android |
| Operating Temperature | -40°F to 140°F |
| Power | 10VA |
To Next Page
