Skycruiser TX-910 - Assembly

Specifications Assembly
- 3 -- 2 -
The structure of the TX-910 is shown in Fig. 1 below.
Step 1. Loosen the lock knob on the lower stem, and take down the bolt. Then
install the lower stem on the search coil, and lock it tightly (see Fig. 2).
Operation Mode
Motion Mode
Non-motion Mode
Coins Depth
Sensitivity Control
Signal Strength
Sound Frequency
Volume Indicator
LCD Backlight
Battery Indicator
Turn-off Prompt
Search Coil
Earphone Jack
Power Supply
Target Metals
Discrimination
4+1
ALL-METAL, DISC, MEMORY, JEWELRY
PINPOINT
2′′, 4′′, 6′′, 8′′ and +
5 Grades
5 Grades
3 Kinds of Frequency Indicating Different Metals
3 Grades
White
4 Bars
Sound a Prompt Tone Every Ten Minutes
Waterproof Search Coil
3.5mm Earphone Jack
Two 9V Alkaline Batteries
6 Kinds; 0 to 99 Double Digits
FERROUS
NON - FERROUS
GOLD SILVER
40
50 60 70 80 90
VOL
S
E
N
S
M
O
D
E
MODE
COIN
DEPT H
Bracket
Upper Stem
Control Panel
Lock Nut
Lower Stem
Lock Knob
Search Coil
Middle Stem
Lower Stem
Screw
Lock Nut
Fig. 1
Fig. 2