Height Ceiling
Height Ceiling sets the maximum allowed altitude your Skydio
X2 will be able to ascend to when in flight. This is a great
setting to enable when flying in controlled airspace, or when
you simply need to prevent the drone from climbing too high.
NOTE: The Height Ceiling is an estimate which the drone will
do its best to respect, however there may be some vertical
drift above or below that limit.
29 Skydio X2 - User guide © 2021 Skydio, Inc. All rights reserved.
DEVICE SETTINGS / DRONE SETTINGS
Obstacle Avoidance (AEF only)
To Next Page
Loading...
