EasyManua.ls Logo

Skydio X2D - Hand Launching and Landing

Skydio X2D
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
When GPS Night Flight is enabled, Skydio X2 does not use its vision system and obstacle avoidance is disabled. Take extra
caution when piloting the drone to avoid obstacles and stay clear of people.
Visibility
Improve visibility by enabling X2’s infrared or visible strobe lights. Skydio X2’s strobe lights meet the FAA requirement of being
visible at a distance of 3 statute miles.
Return behavior
Review X2’s return behavior in the Drone Settings menu, paying particular attention to the return height setting. Skydio X2 does
not avoid obstacles when in GPS Night Flight mode, so you may want to set the drone’s return height such that it will be above
any potential obstacles.
Landing
When landing, use the controller joystick to descend down to 15 ft., then once you’re ready to land, press and hold the “LAND”
button on the screen or the controller.
WARNING: Never hand launch or land Skydio X2 when in GPS Night Flight mode.
74 Skydio X2 - User guide © 2021 Skydio, Inc. All rights reserved.
HAND LAUNCHING AND LANDING
Hand launching and landing
WARNING: Launching and landing of the Skydio X2 drone from your hand is an advanced maneuver only to be used when it is
necessary, and it is advised that you do so only if you are an experienced pilot and you cannot find a clear flat spot to take off or

Other manuals for Skydio X2D

Related product manuals