To toggle the lights on your X2, navigate to Device Settings,
then select Lights under Drone. Both Infrared and Strobe LEDs
cannot be on at the same time.
Step 4 - Launch Skydio X2
Launch X2 by holding the Launch button in the app or on the Skydio Enterprise Controller. After
taking off, the drone will automatically rotate 360° to establish heading.
73 Skydio X2 - User guide © 2021 Skydio, Inc. All rights reserved.
GPS NIGHT FLIGHT
Safety considerations for GPS Night
Flight
Obstacle avoidance
To Next Page
Loading...
