While actively zooming in, the following video capture settings
will be locked:
• Resolution
• Framerate
• HDR On/Off
• Auto/Manual Recording
• Video Codec
To change your video capture settings, reset the zoom level
back to 1x. Once you’re happy with the settings, and they are
compatible with zoom (see below), you can begin zooming.
NOTE: When switching from photo mode to video mode, the
zoom may be reset to 1x if the video mode you are switching
back into does not support digital zoom.
Compatibility
Zoom and Superzoom as well as camera tilt are currently only
available when in flight. You will not be able to activate the
zoom feature while the drone is grounded.
Digital zoom - Digital Zoom is not compatible with all video
recording modes. To enable zoom while recording video,
switch your video mode to one of the compatible modes listed
below:
Video Mode Zoom Compatible 1080p @ 30fps
YES
4k @ 30fps YES
4k @ 60fps NO
Subject tracking - Zooming is currently not compatible with
subject tracking. To detect a subject, the drone must be at the
default 1x zoom level.
57 Skydio X2 - User guide © 2021 Skydio, Inc. All rights reserved.
RETURNING
Returning
When you’re ready to return home, tap the Return to Home button in the app or on the Skydio
Enterprise Controller:
NOTE: Prior to tapping the Return to Home button, make sure no obstacles (e.g., people, animals, etc.) have moved into the
To Next Page
Loading...
Need help?
General
