EasyManuals Logo

Skydio X2D User Manual

Skydio X2D
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
37 Skydio X2 - User guide © 2021 Skydio, Inc. All rights reserved.
LAUNCHING
Launching
Set your Skydio X2 down on clear, flat ground at least 10 feet
away from you. You may also use the top of Skydio X2’s case as
a convenient launch and landing pad.
Launching Skydio X2 is as simple as holding the Launch button
in the app or on the Skydio Enterprise Controller.
Once Skydio X2 is in the air, it will hover in place until you
initiate a skill or use the controller to start flying.
NOTE: Skydio X2 requires a stable GPS connection to fly greater
than 33 ft (10 m) above its point of takeoff. This may not be
possible when flying in GPS denied environments such as
indoors, heavy urban areas, and deep canyons; or when flying
near large metal structures such as radio towers and bridges. If
you are having any difficulty getting your Skydio X2 to fly above
33 ft (10 m), you may need to fly a few feet in a lateral motion
(forward, backward, left, or right) to establish heading.

Other manuals for Skydio X2D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Skydio X2D and is the answer not in the manual?

Skydio X2D Specifications

General IconGeneral
Camera Resolution12 MP
Flight Time35 minutes
Aircraft TypeQuadcopter
Ingress ProtectionIP54
Visual Sensors6x 4K navigation cameras
Gimbal3-axis stabilized
Main Camera Sensor1/2.3" CMOS
Zoom CameraYes
Thermal CameraYes
Thermal Camera Resolution320 x 256
GNSSGPS, GLONASS
Obstacle Avoidance360° Obstacle Avoidance
Maximum Transmission Range10 km
Weight1.3 kg (2.9 lbs)

Related product manuals