HB600-24B CHARGER MANUAL 06JAN2009
- 4 –
exceed the current rating of the extension cable and meet all national and
local electrical code requirements. See Specifications page for current
draw of charger. Overloaded extension cords can catch fire and cause
property damage, serious injury or death.
• Do not operate charger if wiring is damaged including cut insulation or
pinched wires. An electric shock could cause serious injury, or death.
• The charger includes an interlock relay to prevent the machine from
operating while charging. Please see the machine manufacturer’s
documentation for correct wiring and test to ensure correct operation.
Safety: Batteries
• See battery suppliers guide for proper care of batteries and follow
directions carefully. Failure to follow battery care instructions can result in
battery explosion and property damage, severe injury, or death during
charging.
• When attaching charger leads to battery terminals be careful that tools do
not short between battery terminals. Shorting between battery terminals
may cause extreme arcing resulting in explosion or extreme heat that can
cause burns.
• Do not disconnect charger terminals while batteries are charging. Sparking
can occur which could ignite flammable battery gases and cause an
explosion. Always turn the charger off first (unplug from AC).
• Do not touch battery terminals or any exposed electrical parts. Contact
with battery terminals or other exposed electrical parts may cause an
electric shock. Remove all watches, rings, and jewelry to avoid arcing and
electric shock.
To Next Page
Loading...
Need help?
General