SKYJACK, Page 11SJIII Series
Section 1 - Scheduled Maintenance Operator’s Responsibility for Maintenance
Safety Precautions (Continued)
Know and understand the safety precautions before going on to next section.
• DO NOT operate on surfaces not capable of
holding the weight of the aerial platform including
the rated load, e.g. covers, drains, and trenches.
• DO NOT operate an aerial
platform that has ladders,
scaffolding or other devices
mounted on it to increase its size
or work height. It is prohibited.
• DO NOT exert side forces on
aerial platform while elevated.
• DO NOT use the aerial platform
as a crane. It is prohibited.
• DO NOT sit, stand or climb on
the guardrails. It is prohibited.
• DO NOT climb on scissor arm
assembly. It is prohibited.
• BE AWARE of ove rh ea d
obstructions or other possible
hazards around the aerial
platform when driving or lifting.
• DO NOT raise the aerial platform
while the aerial platform is on a
truck, fork lift or other device or
vehicle.
• BE AWARE of crushing hazards.
Keep all body parts inside
platform guardrail.
• DO NOT lower the platform
unless the area below is
clear of personnel and
obstructions.
• ENSURE that there are no personnel or obstructions
in the path of travel, including blind spots.
• BE AWARE of blind spots when operating the
aerial platform.
• STUNT driving and horseplay are prohibited.
• ENSURE ALL tires are in good condition and lug
nuts are properly tightened.
• DO NOT alter or disable limit switches or other
safety devices.
• DO NOT use the aerial platform without guardrails,
locking pins and the entry gate in place.
To Next Page
Loading...
Need help?
General
