SJ46 AJ+ 213208ABA
45
Visual and daily maintenance inspections Section 4 – Inspections Before Operation
3
5
2
1 4
4.2-7 Base
Do the inspection that follows:
1
Turret transportation lock
▪
Make sure the turret transportation lock is
unlocked.
▪
Make sure there are no loose or missing parts.
▪
Make sure there is no visible damage.
Axles
▪
Make sure the front
2
and rear
3
axles are
correctly attached.
▪
Make sure there are no loose or missing parts.
▪
Make sure all the fittings and hose connections
are tight.
▪
Make sure there is no sign of hydraulic
leakage.
4
Tie rod
▪
Make sure there are no loose or missing parts.
▪
Make sure the tie rod end studs are attached
and tight.
▪
Make sure there is no visible damage.
5
Oscillating cylinders
▪
Make sure the cylinder assembly that
oscillates is correctly attached, and there are
no visible spaces.
▪
Make sure there are no loose or missing parts.
▪
Make sure all the fittings and hose connections
are tight.
▪
Make sure there is no sign of hydraulic
leakage.
NOTE
The oscillating axle is locked when the MEWP is
in the elevated travel position or at the elevated
travel speed.
To order go to Discount-Equipment.com
To Next Page
Loading...
Need help?
General
