Need help?Do you have a question about the Skyjack SJ45 AJ+ and is the answer not in the manual?
General| Brand | Skyjack |
|---|---|
| Model | SJ45 AJ+ |
| Category | Boom Lifts |
| Language | English |
Outlines the importance of reading the manual, operator duties, and safety panel labels for safe operation.
Details the main components of the MEWP, including base, turret, boom, and platform assemblies.
Defines the roles of the operator and owner in maintaining the MEWP and following schedules.
Provides minimum safe distances from electrical conductors to prevent electrocution.
Lists crucial safety rules for operating the MEWP, including fall protection and environmental considerations.
Details the operator's responsibility to inspect the worksite for potential hazards before operation.
Identifies and illustrates the main components and control consoles of the MEWP.
Explains the various switches, buttons, and indicators on the base and platform control consoles.
Describes key features like travel positions, drive speed, tilt switch, and load sensing systems.
Lists and describes optional equipment such as flashing amber lights, welders, and weather packages.
Outlines the tasks required of the operator before each work shift, including inspections and tests.
Provides a detailed checklist for inspecting various MEWP components before operation.
Guides the user through performing essential function tests to ensure MEWP operational readiness.
Step-by-step instructions for powering up and preparing the base control console for operation.
Details the procedure for entering the platform and activating the platform control console.
Explains how to drive and steer the MEWP using the drive/steer controller and footswitch.
Provides instructions for properly parking and shutting down the MEWP after use.
Instructions for lowering the platform using the emergency system in case of primary power failure.
Details the procedures for refueling the MEWP with diesel or gasoline, including safety precautions.
Covers securing the MEWP for transport, including locking the turret, hoisting, and tie-down methods.
Illustrates reach envelopes and detailed dimensions for SJ45 AJ+ and SJ60 AJ+ models.
Compares standard and optional equipment available for SJ45 AJ+ and SJ60 AJ+ models.
Provides key performance data, including lift times, rotation speeds, and drive speeds.
Illustrates and describes labels found in the engine compartment, such as disconnect switches and QR codes.
Explains the labels and pictograms on the platform control console for various functions.
To Next Page
