Skyjack SJ45 AJ+ - Daily Visual & Maintenance Checks

238264AAA SJ45 AJ+, SJ60 AJ+
42
Section 4 – Inspections Before Operation Visual and daily maintenance inspections
5
Muffler and exhaust
▪
Make sure that the mufer and exhaust
systems are correctly attached with no visible
damage.
6
Engine intake air filter
▪
Make sure there are no loose or missing parts.
▪
Make sure there is no visible damage.
▪
Squeeze the lips of the vacuator valve to
remove the dirt and dust.
▪
Do an inspection of the service indicator on
the air cleaner. Replace the lter element if
necessary.
7
Engine and engine pivot tray
WARNING
Burn hazard. Do not touch hot engine components
without the correct PPE. Let the engine cool before
you do an inspection or servicing. If you do not
obey, there is a risk of death or serious injury.
▪
Make sure there are no loose or missing parts.
▪
Make sure there is no visible damage to the
engine and engine pivot tray.
▪
Make sure that the engine is correctly attached
to the pivot tray.
Engine oil level
▪
Use the dipstick to check the oil level.
▪
The oil level must be between the marks L
(low) and H (high). Add oil if it is necessary.
Refer to the service manual for the
recommended oil type.
5
6
7
To order go to Discount-Equipment.com