Skyjack SJ45 AJ+ User Manual

SJ45 AJ+, SJ60 AJ+ 238264AAA
65
Section 5 – Operation
WARNING
Do not operate this MEWP without authorization
and training. If you do not obey, there is a risk of
death or serious injury.
Do these tasks in sequence before MEWP operation:
1. Visual and daily maintenance inspections. Refer
to Section 4.2.
2. Function tests. Refer to Section 4.3.
3. Worksite inspection. Refer to Section 2.4.
4. If a risk assessment nds that a rescue plan
is necessary, make sure you have a system of
communication. The communication must be
between the personnel on the platform and
the selected support personnel. The selected
support personnel must know how to use the
base controls to lower the platform.
WARNING
Do not operate the MEWP if:
▪
It does not operate correctly
▪
It is damaged or shows worn or missing parts
▪
The safety devices are tampered with or
disabled
▪
It is locked and tagged for servicing or repair
▪
It was modified without permission from
Skyjack and the MEWP owner.
If you do not obey, there is a risk of death or
serious injury.
WARNING
Do not operate the MEWP with engine power in a
closed space. Only operate the MEWP with engine
power in an open or well-ventilated area. If you do
not obey, there is a risk of death or serious injury.
5.1 Energize the base control
console
WARNING
Fall hazard. Use the three points of contact
principle when you enter or exit the platform. If
you do not obey, there is a risk of death or serious
injury.
1. Enter the platform and close the gate or drop
bar.
2. Pull the emergency-stop button on the platform
control console.
3. For dual fuel engines, select the fuel type by
moving the fuel switch to the gasoline or liquid
propane gas position.
4. Exit the platform.
5. Turn the main power disconnect switch to the
on position.
6. Turn the off/base/platform key switch to the
base position.
7. Pull the emergency-stop button on the base
control console.
WARNING
If you do not hear a beep, and the light does not
come on, lock and tag the MEWP. Remove the
MEWP for servicing. If you do not obey, there is a
risk of death or serious injury.
8. Select the start position from the start/function
enable/emergency power switch until the
engine starts.
WARNING
Do not over crank the starter. If the engine does
not start after you try to start it multiple times,
lock and tag the MEWP. Remove the MEWP for
servicing. If you do not obey, there is a risk of
death or serious injury.
If your MEWP has the cold or arctic weather package
option installed, refer to Section 5.27 for additional
information.
To order go to Discount-Equipment.com

Skyjack SJ45 AJ+ Specifications

General

Brand	Skyjack
Model	SJ45 AJ+
Category	Boom Lifts
Language	English