SJ46AJ SJ51AJ SJ63AJ
December 2007 Page 43
FAMILIARIZATION
It is the responsibility of the operator to read, completely understand and follow all
instructions and warnings contained in this operating manual and on the MEWP.
• Test Hydraulic Generator (If Equipped)
1. Ensure engine is running.
2. On platform control console, turn generator
on/off switch to “ ” on position.
Result: Engine will automatically switch
to high throttle and generator will start.
3. On platform control console, turn generator
on/off switch to “ ” off position.
Result: The generator will turn off and
throttle will return to selected speed.
NOTE
An engine shut down will turn the generator off.
Normal boom functions are disabled while the
generator is on.
Work Light
Section 2 - Familiarization Procedures
To Next Page
Loading...
