Skyjack SJ86T User Manual

Page 28 December 2007
SJ 86T
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the MEWP.
FAMILIARIZATION
2.3-11 Rotary Actuator
- Ensure there are no loose or missing parts
and there is no visible damage.
- Ensure all bolts and pins are properly
tightened.
- Ensure all hoses are properly tightened and
there is no evidence of hydraulic leakage.
2.3-12 Load Cell
- Ensure there are no loose or missing parts
and there is no visible damage.
- Ensure all bolts are properly tightened.
- Ensure all cables are secure and are in proper
working condition.
- Ensure debris is not lodged between the
platform and boom adaptor.
2.3-13 Jib
- Ensure there are no loose or missing parts
and there is no visible damage.
- Ensure all bolts and pins are properly
tightened.
- Ensure all hoses are properly tightened and
there is no evidence of hydraulic leakage.
2.3-14 Boom
- Ensure there are no loose or missing parts
and there is no visible damage.
- Ensure all bolts and pins are properly
tightened.
- Ensure all hoses are properly tightened and
there is no evidence of hydraulic leakage.
• Cylinders
- Ensure all cylinders are properly secured
and there is no evidence of leakage.
• Wear Pads
- Ensure all bolts are tight, there is no
visible damage to the wear pads and that
no parts are missing.
• Hoses
- Ensure all hoses are properly tightened
and there is no evidence of hydraulic
leakage.
• E-Chain
- Ensure there are no loose or missing
parts and there is no visible damage.
Rotary Actuator
Jib
Boom
E-Chain
Lift Cylinder
Wear Pad
Wear Pad
Cable Springs
Cable Springs
Visual & Maintenance Inspection Section 2 - Familiarization

Skyjack SJ86T Specifications

General

Brand	Skyjack
Model	SJ86T
Category	Boom Lifts
Language	English