Skyjack SJ86T User Manual

Page 34 December 2007
SJ 86T
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the MEWP.
FAMILIARIZATION
• Test Emergency Power
1. On base control console, push in “ ”
emergency stop button to turn engine off.
2. On platform control console, push in “ ”
emergency stop button.
CAUTION
When operating on auxiliary power, do
not operate more than one function
at a time to avoid overloading 12-Volt
auxiliary pump motor.
NOTE
To conserve battery power, test each
function through a partial cycle.
3. On base control console, pull out “ ”
emergency stop button.
4. On base control console, turn off/base/
platform key switch to “ ” platform
position.
5. Select “ ” emergency power
position from start/function enable/
emergency power switch and activate
each boom function.
Result: All selected functions should
operate.
6. Turn off/base/platform key switch to
“ ” base position.
7. Select “ ” emergency power
position from start/function enable/
emergency power switch and activate
each boom function.
Result: All selected functions should
operate.
HOUR METER
QUARTZ
COUNTER
Base Control
Console
Off/Base/Platform Key
Switch
Emergency Stop
Start/Function Enable/
Emergency Power Switch
Function Tests Section 2 - Familiarization

Skyjack SJ86T Specifications

General

Brand	Skyjack
Model	SJ86T
Category	Boom Lifts
Language	English