To Next PageTo Next PageWhy does the light on my SkyLink IQ stay on?
It is normal for the opener's light to stay on for about 3 minutes after each activation. If the opener's light was turned on by the light button on the Wall Console, it will stay on until the light button is pressed again to turn the light off.
General| Brand | SkyLink |
|---|---|
| Model | IQ SERIES |
| Category | Garage Door Opener |
| Language | English |
Secure the pulley bracket to the front end of the T-rail assembly.
Slide trolley onto the T-rail from the back, aligning with the stop bolt hole.
Raise the opener onto a stepladder and connect the T-rail sections.
Set the fully open and closed positions for the garage door.
Add new remote controls to operate the garage door opener.
Remove all previously programmed remote controls from the opener's memory.
Review critical safety guidelines before operating the door opener.
Learn how to activate the opener and the door's response to commands.
Solutions for when the opener does not respond to controls.
Diagnosing issues when the opener runs but the door remains stationary.
Addressing problems with the door not opening or closing fully.
Identifying causes for the opener activating on its own.
