Skyrc IMAX B6 V2 User Manual

Table of Contents
WARNING:
Introduction
Special Features
Warning and Safety Notes
Program Flow Chart
Explanation of Buttons
Power and Battery Connection
Charge Operation
Lithium Battery Program (LiPo/LiFe/Lilon/LiHV)
NiMH/NiCd Battery Program
Pb Lead-acid Battery Program
DJI Battery Program
DC/DC Converter
Battery Memory Set and Call Out
System Setting
Battery Voltage Meter
Battery Resistance Meter
Warning and Error Message
The Set Contains
Specification
Conformity Declaration
Regulatory Information
Commonly Used Terms
Warranty and Service
01
03
05
08
10
11
13
14
17
22
26
28
29
31
33
34
35
36
37
38
39
40
41
SkyRC B6 V2 is a high-performance, micro processor control
charge/discharge with battery management suitable for use with
all current battery types(LiPo/LiFe/Li-Ion/LiHV/NiMH/NiCd/Pb)
batteries.The charger deliver dedicated 60W integrated power
and can fill battery at up to 6A. Except SkyRC normal charging
programs, it is versatile with the addition of AGM and Cold modes
for Lead Acid(Pb) battery.
This charger can be powered by 11-18V DC, it is able to power
DC equipment such as LED pit light, motor checker, etc.
Please BE SURE to read these INSTRUCTIONS, WARNING and
SAFETY NOTES before you use the charger for the first time.It
can be dangerous to mis-handle batteries and battery chargers,
as there is always a risk of batteries catching fire and exploding.
Mishandling batteries and battery
chargers is extremely dangerous,
which may cause fire and explosion.
Introduction
01 ·B6 V2
Never leave the charger unattended
when charging the battery.
LiPo batteries pose a severe risk of
fire if not properly handled.
Congratulations on your choice of SKYRC B6 V2 DC Balance
Charger/Discharger. This unit is simple to use, but the operation of
a sophisticated automatic charger such as SKYRC B6 V2 does
require some knowledge on the part of the user. These operating
instructions are designed to ensure that you quickly become
familiar with its functions. It is therefore important that you read
right through the Operating Instructions, Warning and Safety
Notes before you attempt to use your new charger for the first
time. We hope you have many years of pleasure and success with
your new battery charger.

Skyrc IMAX B6 V2 Specifications

General

Charge Current	0.1-6.0A
Battery Types Supported	LiPo, LiFe, LiIon, NiMH, NiCd, Pb
Max Charge Power	50W
Max Discharge Power	5W
Dimensions	133 x 87 x 33 mm
Case Material	Plastic
Display Type	LCD
Charge Wattage	50W
Discharge Wattage	5W
LiPo/LiFe/Lilon Cells	1-6S
NiMH/NiCd Cells	1-15S
Pb Battery Voltage	2-20V
Input Voltage	11-18V DC
Discharge Current	0.1-2.0A

Summary

Introduction

Product Overview and Safety

Describes the charger's features and critical safety warnings.

Special Features - Part 1

Optimized Operating Software

Special Features - Part 2

Battery Voltage Meter

Checks total, highest, lowest, and individual cell voltages.

Battery Internal Resistance Meter

Checks battery voltage and internal resistance.

Capacity Limit

Processing Time Limit

Temperature Threshold

Warning and Safety Notes

Battery Handling and Charging Procedures

Covers prohibited batteries, pre-checks, charging, and discharging procedures.

Explanation of Buttons

Button Functions

Explains the purpose of BATT PROG/STOP, DEC, INC, and ENTER/START buttons.

Power and Battery Connection

Connecting to Power Source

Details how to connect the charger to a DC power source.

Connecting the Battery

Details LiPo, NiMH/NiCd, and Pb battery connection methods.

Charge Operation

Charging Programs by Battery Type

Describes different charging modes for LiPo, NiMH/NiCd, and Pb batteries.

Lithium Battery Program

Memory Profiles and Manual Setup

Battery Monitoring and Status

NiMH/NiCd Battery Program

Selecting Battery Type and Charge Mode

Guides on choosing NiMH/NiCd type and entering charge mode.

NiMH/NiCd Discharge Mode

Details the process for discharging NiMH/NiCd batteries.

NiMH/NiCd Re-Peak Mode

Explains the re-peak charging process for NiMH/NiCd batteries.

NiMH/NiCd Cycle Mode

Pb Lead-acid Battery Program

Pb Charge Mode

Details the normal charging process for Pb batteries.

Pb AGM Mode

Pb Cold Mode

Pb Discharge Mode

Details the discharging process for Pb batteries.

Battery Memory Set and Call Out

Battery Memory Set

Battery Memory Call Out

Battery Voltage Meter

Checking Battery Voltage

Battery Resistance Meter

Checking Battery Resistance

Warning and Error Message

Error Notifications and Causes

Lists common errors and their explanations for troubleshooting.

Specification

Technical Specifications

Details input voltage, display, material, weight, ports, and operating parameters.