Skyrc PC1080 User Manual

Thank you for choosing SkyRC PC1080 dual channel LiPo charger.
This charger, which is capable of balance charging 2 packs of 6 cell batteries simultaneously, is
specifically designed for drone players. It has three working modes, charge, balance charge and
storage (suitable for batteries with no balance lead). Master and Slave mode are available, enabling
the user (the charger) to perform synchronous settings for numerous (synchronize 2 or more) chargers
via data cables. In addition, PC1080 has short-circuit, reverse polarity, and overheat protection to
ensure maximum safety.
-1-
Power on: connect to the power source and turn on the power switch. A beep sound will be heard, and the LCD
screen will be displayed as below:
Battery connection: Please connect your batteries to PC1080 charger as below:
(Note: Be aware that the Lithium battery to be charged should be 6 cells. Make sure the battery balance lead and
charging lead are connected correspondingly to the charger.)
1)
2)
L i P o B A L A N C E C H G
2 . 0 A O F F - L I N E
Battery Type (LiPo/LiHV)
Charging Current (1.0-20.0A)
Charging modes (balance
charge, storage & charge)
Synchronous status
(Off, Master, Slave)
-2-
SkyRC PC1080 charger
AC power cord
Synchronous data
connectors
INSTRUCTIONMANUAL
PC1080 SK-100124
PRODUCT DESCRIPTION
Handle
LCD Display of Second Channel
LCD Display of First Channel
Power Switch
PC Link
Data Link
AC Input 100V-240V
Cooling Fan
Control Button
Balance Socket
XT90 Battery Port
Anti-dust Air Intake
FEATURES
Support charging 2 packs of 6s LiPo batteries simultaneously
Support high voltage LiPo (LiHV) battery
Memorizing last charging current
Three working modes: balance charge, storage & charge
Master & Slave mode available
Synchronize 2 or more chargers via data cable.
Maximum safety: short circuit protection, reverse polarity protection & over heat protection.
Adjustable charging current
2x16 LCD screen.
Real time charging/ discharging status display
Voltage meter
Internal resistance meter
Firmware upgrade via USB port
PACKAGE CONTENTS
OPERATION PROCEDURE

Skyrc PC1080 Specifications

General

Charge Circuit Power	80W
Discharge Circuit Power	10W
NiMH/NiCd Cell Count	1-15S
Current Drain for Balancing	300mA
Display	LCD
Charge Current Range	0.1-8.0A
Discharge Current Range	0.1-2.0A
Battery Types Supported	LiPo, LiFe, Li-ion, LiHV, NiMH, NiCd, Pb
LiPo/LiFe/Lilon/LiHV Cell Count	1-4S
Pb Voltage	2-24V
Charging Ports	1
Current Range	0.1-8.0A

Summary

Product Description and Features

Product Description

Details about the SkyRC PC1080 dual channel LiPo charger, designed for drone players.

Key Features

Highlights include charging 2x 6s LiPo batteries, high voltage LiPo support, and safety protections.

Operation Procedure and Settings

Operation Procedure

Steps for powering on the charger and connecting batteries for charging.

Parameter Settings

Guide to adjusting settings like working mode, charging current, and master/slave mode.

Switch Between LiPo and LiHV

Instructions on how to change battery type settings, with a caution for incorrect selection.

Advanced Functions and System Setup

Battery Meter and Resistance

Functions to check remaining capacity, voltage, and internal resistance of batteries.

System Setup Options

Configuration for safety timer, balance port, key beep, and version checking.

Error Codes and Specifications

List of potential errors and the charger's technical specifications.

Safety Precautions and Liability

Warnings and Safety Precautions

Essential safety guidelines for using the charger and batteries to prevent damage or fire.

Liability Exclusion

Disclaimer regarding the charger's intended use and SkyRC's liability.

Warranty and Service Information

Details on product warranty coverage and how to obtain service.