EasyManuals Logo

SkyTraxx 3.0 User Manual

SkyTraxx 3.0
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13
After a few minutes (time interval can be set via the menu, if needed), the SKY-
TRAXX will switch to Standby mode to save power. The display will go dark
and a red LED will flash. Once the device is moved, it will automatically switch to
display mode.
Battery charging: connect the charging unit to the USB port on the right-hand
side of the device using the supplied USB cable. The red LED will continue to
flash while the battery charges.
Red LED flashing: battery is charging, standby mode or request for attention,
e.g. if you are navigating the menu and an airspace warning is issued.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SkyTraxx 3.0 and is the answer not in the manual?

SkyTraxx 3.0 Specifications

General IconGeneral
BrandSkyTraxx
Model3.0
CategoryMeasuring Instruments
LanguageEnglish