SkyTraxx 3.0 User Manual

12
The SKYTRAXX 3.0 is preconfigured allowing immediate use.
Switch on: press the On/Off/Menu button >Menu until »booting...« appears on
the screen. The device will be ready to launch after 30 seconds.
Record: data logging automatically starts after take-off and ends a few se-
conds after landing (or when Skytraxx recognises that there is no more aerial
movement).
Switch off: press the On/Off/Menu button >Menu until the circle around the
Switch-off button is complete and »Bye« appears on the screen.
Display brightness adjusts automatically according to surrounding light levels
(can be set manually via the menu).
To switch between the individual display pages, use the >OK button. If
the display shows a map, the scale can be changed using the >Up / >Down
buttons.
Quick start

SkyTraxx 3.0 Specifications

General

Brand	SkyTraxx
Model	3.0
Category	Measuring Instruments
Language	English