14
Screen display
The SKYTRAXX 3.0 records all flight-relevant data using highly precise sensors
and a GPS system. Clever software modules then evaluate this data and present
it on the screen in customisable display fields and on maps. The climb and de-
scent rate are also monitored and are conveyed via acoustic signals (vario beeps).
To improve usability and legibility, optical displays can be divided over several
screens (screens can be browsed through using >OK).
Standard configuration (factory settings) cover a wide range of flying practices.
The mode Simple menu is protected against accidental deletion or modification.
In Expanded menu mode, you can change the screen displays as you wish
and expand them. For more information on this, see the »Screen pages« chapter
in the online manual on our website
It is preconfigured for the course to always be shown above on the display maps,
i.e. the position symbol is set to point upwards; the map and tracked route
move in accordance with flight trajectory.
The scale of the map currently on display can be changed using the >Up /
>Down buttons.
To Next Page
Loading...
Need help?
General