26
Easy menu >Settings
The following settings can be configured for the SKYTRAXX 3.0 in Simple Menu.
The settings on offer cover a very wide range of needs from normal flying
practice:
> Volume: sets the volume of vario beeps and warning sounds. Select the
desired volume level using >Up / >Down button and confirm using >OK. The
device then saves the selected volume.
> Climb tone Threshold: this setting determines what climb rate will initiate
the vario beeps. In general practice, parameters between 0.2m/sec and 0.5m/
sec are adequate.
> Map: manual selection of the map.
> Display Brightness: sets display brightness. This can be set manually using
a fixed value or it can automatically adjust the brightness in accordance with
light conditions.
> Pilot profile: enables entry of personal data for the flight log. See Pilots profi-
les on page 20.
> Language: enables selection of the menu language.
To Next Page
Loading...