29
> Connect your flight instrument via USB to your computer (see USB con-
nections/internal memory on page 22) and confirm „Connect as USB mass
storage device“ with >OK. Your flight instrument will then appear on your
computer as an external mass storage device.
> Copy the downloaded file to the „Update“ directory on the SKYTRAXX.
> Disconnect the the SKYTRAXX mass storage device from your computer
(eject).
> Select >Menu >Update and then >Unzip archive. Select the recently down-
loaded file and confirm using >OK. Software updating will then start automati-
cally. Wait until your device displays the usual screen.
To Next Page
Loading...
Need help?
General