11
STEP 9
Now, repeat step 8 on the other side of the trampoline. Make sure to count
the exact number of V-rings and frame holes so each one corresponds!
You now have attached 2 V-rings to the frame holes using 2 springs.
Springs (x1)
8
STEP 10
Next, find the middle of the 2 springs by counting the exact number of
V-rings and frame holes. Place a spring into the V-ring just left of the T-joint,
and stretch the spring until it reaches the frame hole just left of the T-joint.
Now, repeat this step on the other side of the trampoline. You now have
attached 4 V-rings to the frame holes using 4 springs.
Springs (x2)
8
(8)
Enclosure door
(8)
T-joint
T-joint
(8)
Enclosure door
To Next Page
Loading...
