ASSEMBLY
7
STEP 1
Register your trampoline! For info on warranty registration, see page 2.
READ THIS BEFORE YOU BEGIN
• You’ll probably need at least two adults and 2 hours to assemble your trampoline (of course, that depends on
what model you have, and whether or not you’re secretly a superhero)
• We’ve provided some tools to help with assembly, but you’re more than welcome to use your own
• The assembly steps refer to parts by their descriptions and key numbers (see the part list on page 3)
• The assembly steps are written in a specific order, and if you don’t follow them exactly, you may end up having
to start all over again
• Most importantly, it will be worth it. Trust us
If you’re a visual learner, check out our assembly videos! They’re pretty great!
skywalkertrampolines
STEP 2
T-joint (x6)
Socket (x6)
1
2
T-joint
Socket
Top Tube (x12)
18
(18)
(18)
Holes face
the ground
Holes face
the ground
(1)
(2)
Holes face
the ground
Holes face
the ground
(1)
(2)
the large side
the large side
(18)(18)
Insert the large side of a top tube (18) into a
T-joint (1). Then insert another top tube (18) into a
socket (2).(The holes in the tubes should face the
ground.) Now insert the top tube (18) with T-joint
(1) into the top tube with socket (2). This makes
one top tube section. Now repeat this step until
you have 6 top tube sections. Make sure the
T-joints and sockets are alternating and the holes
face the ground.
To Next Page
Loading...
