EasyManua.ls Logo

SkyZone Cobra X - Settings and Features; Head Tracking Configuration; Image Adjustment Settings; Display Settings

SkyZone Cobra X
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
·Short press right button to pop up or quit setting menu.
·Roll right wheel to navigate, press the right wheel to select.
Settings
Head Tracking
·The head tracking button is on the right side of the goggles.
·The gyro required for an initialization time. When it is powered on, goggles must be kept horizontal
and stable as long as possible. When hearing the sound of a "beep", the initialization is done.
·Hold HT button to reset the PPM signal to the center, goggles will beep when press the button.
Disable the Headtracker can save the gyro initialization time to speed up goggles boot time.
Image
· n image setting menu, customer have standard, bright, vivid, soft and 3 customized s to adjust. I le
· ustomer can adjust Brightness, ontrast, aturation, Hue and Sharpness to C C S suit dierent environment in
3 user 1/2/3, the image setting can not change in 4 pre-set les.
DISPLAY
· In Display setting menu, customer can change the aspect ratio(4:3 or 16:9), default is 16:9*.
·In Display menu, customer can set the RSSI icon: icon + percentage, Icon, Percentage, disable, also
adjust the vertical position of the RSSI.
·The Luminance of the screen and be adjust in the menu (3 stages, default is 2).Normally do not set the
brightness too high unless the image is dim.
COBRA S only have 16:9 Mode.
DVR
·Left button is recording button and stop button.
·Build in DVR H264 encoding SD card recommend Class10, SD card can support up to 128GB. ,
·SD card must be formatted into FAT32 , user can get into system menu to select the Format SD .
·The video recording function can be used in both the RF Mode and the AV IN Mode.
·By default, when recording the video (including: recording the sound), the "sound recording" function
can be turned off in the system menu, and the video signal can be recorded only.
·Automatic recording: enable this function , if the video signal has been detected, the recording function
will be activated automatically. The recording function can also manually be stopped by press the REC
button.
·Cyclic recordingOverwriting of older recordings on or off (in case of storage space is wasted).
·The video recording File will be automatically divided into the multiple Files. In the menu system, the
video length can be set as: 5 minutes, 10 minutes, 20 minutes and 30 minutes. The default video length
can be set as 30 minutes / each file.
·If the power has been suddenly disconnected during video recording process, the DVR will be damaged.
The goggles have repairing function. After entering into the playback mode, the last DVR will be
automatically checked. If it is damaged, the DVR will be automatically repaired.
5

Related product manuals