7
DVR
1,Take a SD card and format the card to FAT32.
2,Copy the DVR Firmware to the SD card , insert it in the goggles and turn it on.
3,Go to the system menu and choose DVR FM upgrade.
*COBRA S cant upgrade the firmware of DVR
Receiver Firmware
1, Take the receiver out, hold the boot button when connect the receiver to the computer.
2,Computer will automatically install the driver , computer will show a new removable storage .
3, Copy the Firmware File to the folder(Not the SD card). goggles will installing the update at the same
time. when to copying is done, the firmware upgrade is done.
Charging
· e goggles inte rated with charging modu e barrel connectorTh g l ， ser can cho se US harg or u o B c e use
charge.
·when goggles is powered via barrel connector ，the external power is also charging the internal
18650 battery.
·DC and Type C can both charge the internal 18650 battery.
F y， do not charge the battery unattended .· or safet
The 18650 battery bay have protection circuit, if remove the battery without turn off the goggle, the·
battery will in protection status, to quit protection, the goggle need use DC cable or USB cable to
chargethe battery to quit this mode.
This content is subject to change, download latest version from:
www.skyzonehobbies.com
Even enabled the rotary switch function, the boot button is still left button. when the copying is done,
the firmware upgrade is done.
F
irmware Upgrade
G
oggles
1,Connect goggles to the computer.
2,H
old the left wheel when turn on the goggles, the usb cable will power the goggles, release the left
button, computer will automatically install the driver , computer will show a new removable storage .
3, co
py the Firmware File to folder(Not the SD card). goggles will installing the update at the same time.
To Previous Page
Loading...
