2
2 0 71
4 2024
-
Sleipner Installation Guide
Sleipner Motor AS
P.O. Box 519, Arne Svendsensgt. 6-8
N-1612 Fredrikstad, Norway
MC_0020
Contents
Installation Manual
Responsibility of the Installer .................................................................................................................................................................... 3
General Installation Consideration and Precaution Guidelines ................................................................................................................ 3
S-link External Switch Interface Installation ............................................................................................................................................ 4
8730B Wiring Diagram ............................................................................................................................................................................... 4
8730B Wiring Diagram - With Touch Panel ................................................................................................................................................ 5
8730S Wiring Diagram ................................................................................................................................................................................ 5
Using Switch Interface 87300 With Other Control Units .......................................................................................................................... 6
Sample S-link System Setup ...................................................................................................................................................................... 7
Wiring Example: Sleipner Retract Thruster and ‘on-off’ Thruster Combined ........................................................................................... 7
Service and Support ................................................................................................................................................................. 8
Product Spare Parts and Additional Resources ......................................................................................................................... 8
Warranty Statement ................................................................................................................................................................. 8
The installer must read this document to ensure necessary familiarity with the product before installation.
Instructions in this document cannot be guaranteed to comply with all international and national regulations. It is the responsibility of the
installer to follow all applicable international and national regulations when installing Sleipner products.
The recommendations given in this document are guidelines ONLY, and Sleipner strongly recommends that advice is obtained from a person
familiar with the particular vessel and applicable regulations.
This document contains general installation instructions intended to support experienced installers. If you are not skilled in this type of work,
please contact professional installers for assistance.
If required by local regulation, electrical work must be done by a licensed professional.
Appropriate health and safety procedures must be followed during installation.
Faulty installation of Sleipner products will render all warranties given by Sleipner Motor AS.
Ensure appropriate access to Sleipner products during installation planning for service, inspection and component replacement.
MC_0038
Responsibility of the Installer
MC_0440
General Installation Consideration and Precaution Guidelines
To Next Page
Loading...
