Slime 40050 - Safe Operation and Tire Inflation Guide; Essential Safety Precautions; Step-by-Step Tire Inflation Process

INFLATE TIRES
1. Screw air hose connector onto tire's valve stem.
2. Plug power cord into 12 volt accessory power outlet.
3. Press ON/OFF switch to turn on inflator. Inflate tire to manufacturer's recommended air
pressure.* When proper pressure is reached, press ON/OFF switch to turn off inflator.
Unplug power cord and remove air hose connector.
*NOTE: Correct tire pressure can be found in vehicle owner's manual or on driver's side door
jamb.
NOTE: Engine should be running while using this inflator. See Warning Section for
further details.