The following are actions will ensure optimum battery life and performance:
•
Please select the correct plug socket adaptor for your region.
•
Please ensure that the plug socket selected is correctly fitted to the main charger body and that it
has “clicked“ into place.
•
Connect the power cable to a wall power outlet. Please note a GREEN light will now appear on the
charger plug to indicate the power is ‘On’.
•
Connect the charger cable to the power outlet on the Launcher control panel.
•
If the battery has less than full power then the indicator light on the charger plug will show RED and
charging will take place. The indicator light will turn GREEN when the battery is fully charged and
the power socket should then be removed from the power outlet
•
If indicator light remains GREEN then the battery is already fully charged. In this case please
immediately disconnect the battery from the power outlet.
USER NOTE
Please ensure that the power cable is ‘pushed’ fully into the power socket on the
control panel creating a tight connection.
GETTING STARTED
The Slinger Bag lithium battery is shipped to you at a maximum 30% charge in accordance with
federal requirements for shipment of Lithium Batteries.
ASSEMBLING THE CHARGER CABLE
NOTE
The battery will not charge if the plug socket is not correctly fitted.
NOTE
In order to prevent the battery overheating it is not advised to leave the power
outlet connected to the battery for longer than 5 hours in any charging period
NOTE
The Launcher CANNOT be used when connected to the power outlet. This will
irreparably damage the battery.
11
Slinger Bag User Guide - Pickleball 2/2023
To Next Page
Loading...
