TROUBLESHOOTING
USER NOTE
For more information visit: www.slingerbag.com/support.
WARNING
Please make sure that the launcher power is in ‘OFF’ position before investigating any
issues. For additional or specific help please email support@slingerbag.com.
CAUSE ACTION REQUIRED
Ball is not launched
Ball is not launched
Feeding plate does
not turn
PROBLEM
A ball is jammed in
either the Feeder Plate
or the Ball Chute.
TURN OFF POWER, WAIT 1
MINUTE FOR THE FIRING
WHEEL TO STOP ROTATING
and only then remove any
jammed balls from either the
feeder plate or from the Ball
Launcher chute.
Pickleballs and/or
pitching wheels are wet.
Wheels and/or balls require
cleaning and drying. Remove
any wet balls from hopper.
A ball is jammed / too
many balls in the
hopper.
TURN OFF POWER and
remove any jammed balls /
from the hopper.
Feeding plate does
not turn
Remote “On” not
activated No battery
power.
Standing to the front and side
of the Launcher, press top
button on remote once to
start feeder plate rotation.
24
Slinger Bag User Guide - Pickleball 2/2023
To Next Page
Loading...
