CAUSE ACTION REQUIRED
Loud noise and / or
vibration
Feeding plate does
not turn
PROBLEM
If above fails to activate
the feeder.
Contact
support@slingerbag.com
Charger cable is not
fully inserted in control
panel.
Check all connections.
Check power socket adapter
is correctly selected and
connected.
Battery Not Charging
and has no light
when connected to a
power outlet
Magnetic Cable
attachment needs
cleaning.
Ensure that both ends of the
magnetic connector are free
from debris, dust etc.
Loose elevation bar
knob.
Tighten the elevation knob.
Oscillator not operating
(both via remote or
manually)
Remote control button
not activated.
With the Launcher “ON” press
lower button on remote
control to activate launcher.
When Oscillator is connected
there is a green LED
illuminated above the
magnetic connector socket.
Oscillator operating
manually but not
operating via remote
control
If the above have been
checked and still no
operation.
Contact
support@slingerbag.com
Oscillator not operating
at all ((both via remote
or manually)
25
Slinger Bag User Guide - Pickleball 2/2023
To Next Page
Loading...
