TROUBLESHOOTING & MAINTENANCE
After use, court dust can typically build up on the fascia of the launcher. This is best removed using
readily available pressurized air canisters, or by using a damp cloth.
•
For General cleaning, when possible please use a pressurized air canister to clear.
•
Use a damp cloth to wipe down the exterior surfaces of the machine.
•
Never scrape at the surface of your Launcher with a sharp object, or use any harsh abrasives or
solvents.
•
Loose debris can be vacuumed out of the Launcher.
•
Never use a water hose to attempt to remove debris out of the interior of the machine. Water
pressure will damage the sensitive electrical components, as well as increase the risk of electric
shock.
STORAGE
The following actions will ensure optimum performance:
•
When the Launcher is not in use, it should be stored in a dry and clean area.
•
Excessive exposure to wind, rain, sunlight, etc. can often interfere with the operation of the
sensitive electrical components and cause fading and/or other damage to Slinger Bag exterior.
•
Do not store the battery for more than 30 days without recharging it to a minimum 30% level and
remember to ALWAYS charge the battery outside of the Slinger Bag.
•
We recommend that the Slinger is stored at temperatures between 64°F–82°F (18°C–28°C), away
from direct sunlight.
FACTORY TESTING
Before shipping, every Slinger Bag is fully QC tested at several points across the production assembly.
As a result, there may be some residue either inside your Slinger Bag Launcher and/or possibly other
marks left as a result of this QC testing. This is perfectly normal.
23
Slinger Bag User Guide - Pickleball 2/2023
To Next Page
Loading...
