LAUNCHING
STEPS
1. Find a wide open area with unobstructed steady wind. Make sure there are no
rocks, trees, fences, cars, power lines or people downwind of you or in your wind
window.
2. Have your launching partner walk your kite to the edge of the wind window
and have them turn the kite on its side and hold the leading edge facing towards
the wind.
3. Once you have tension in your lines, do a safety check to make sure you are
attached to your Quick Release Surefire Bungee, and that your Oneline is flowing
freely through the center of your bar by pulling the Oneline trim and releasing it.
If the Oneline flows freely, you are ready to launch.
4. Signal to your launching partner that you’re ready to launch and as they let go
of your kite, pull the top half of your bar towards you to SLOWLY raise your kite
into the sky. Get in the water quickly and enjoy your session!
P 07
1
2
3 4
To Next Page
Loading...
