Sloan OPTIMA Series - User Manual

Installation of the Sloan OPTIMA Series Electronic Hand Dryer makes
drying of hands totally “hands-free” providing the ultimate in sanitary
protection and automatic operation. There are no buttons to push. The
OPTIMA series electronic hand dryer uses fiber optic and adaptive
sensing technology to sensetheuser’spresenceandactivate.Whenthe
user’s presence is no longer detected, the hand dryer automatically
stops.
The OPTIMA series electronic hand dryer is designed for easy
installation and maintenance, quiet and efficient operation, and years of
dependable, trouble-free service.
The following instructions will serve as a guide when installing the
OPTIMA Series electronic hand dryer. As always, good safety practices
and care are recommended when installing your new hand dryer. If
further assistance is required, contact your nearest Sloan
Representative office.
Made in the U.S.A.
EHD l.l. — Rev. 2 (01/01)
Code No. 0816167
INSTALLATION INSTRUCTIONS AND MAINTENANCE GUIDE
OPTIMA™ SYSTEMS
SENSOR OPERATED SURFACE MOUNTED ELECTRONIC HAND DRYER
Model EHD 120
Sensor Operated Hand Dryer
120 VAC
Model EHD 208/240
Sensor Operated Hand Dryer
208 VAC or 240 VAC
LIMITED WARRANTY
Sloan Valve Company warrants its Electronic Hand Dryers to be made of first class materials, free from defects of material or workmanship under normal use and to
perform the service for which they are intended in a thoroughly reliable and efficient manner when properly installed and serviced, for a period of five years from date
of purchase. During this period, Sloan Valve Company will, at its option, repair or replaceany part or parts which prove to be thus defective if returned to Sloan Valve
Company, at customer’s cost, and this shall be the sole remedy available under this warranty. No claims will be allowed for labor, transportation or other incidental
costs. This warranty extends only to persons or organizations who purchase Sloan Valve Company’s products directly from Sloan Valve Company for purpose of
resale.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENT IS SLOAN VALVE
COMPANY RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES OF ANY MEASURE WHATSOEVER.
Listed

Summary

LIMITED WARRANTY

PRIOR TO INSTALLATION

Installation Precautions

Guidelines for safely and optimally mounting the hand dryer unit.

INSTALLATION

Mount Chassis and Electrical Hook-Up

Mount the chassis and connect electrical wiring as per diagrams and precautions.

Test Self-Calibration and Operation

Verify proper operation after power-up, including sensor activation and air flow.

Install Cover Assembly

Attach the cover assembly securely using tamper-resistant screws.

SELF-ADAPTIVE SENSING

OPERATION

TROUBLESHOOTING GUIDE

No Air Supplied

Diagnose and resolve issues where the dryer does not supply air when hands are present.

Only Unheated Air Supplied

Troubleshoot cases where only unheated air is dispensed by the dryer.

Intermittent Air Cycles

Address problems with the dryer's air supply cycling on and off unexpectedly.

Dryer Runs Continuously

Resolve instances where the hand dryer fails to shut off after use.

Unit Difficult to Activate

Troubleshoot reasons why the hand dryer may be difficult to activate.

SERVICING OLDER SLOAN EHD HAND DRYERS

Sloan OPTIMA Series Specifications

General

Type	Hand Dryer
Frequency	60Hz
Power Consumption	1200W
Material	Stainless steel
Model	OPTIMA
Drying Time	10-15 seconds
Mounting	Surface Mounted
Vandal Resistance	Yes