2 Safety
SMA Solar Technology AG
Installation ManualSBxx-1SP-US-41-IA-xx-1012
NOTICE
Destruction of the measuring device due to overvoltage
• Only use measuring devices with a DC input voltage range of 600V or higher.
Electrical installations (for North America)
All installations must conform with the laws, regulations, codes and standards applicable in the
jurisdiction of installation (e.g. National Electrical Code
®
ANSI/NFPA 70 or Canadian
Electrical Code
®
CSA-C22.1.).
• Before connecting the product to the utility grid, contact your local grid operator. The
electrical connection of the product must be carried out by qualified persons only.
• Ensure that the cables or conductors used for electrical connection are not damaged.
ENGLISH
To Next Page
Loading...
