Electrical Connection SMA Solar Technology AG
38 SMC6-8TL-IEN101040 Installation Guide
Configuration Options
There are 4 different configuration options for the "PowerBalancer" parameter.
•FaultGuard
This operating mode enables the implementation of three-phase grid voltage monitoring that
also reacts to device failures.
– If one of the three inverters indicates a grid voltage fault and stops feeding in, the other
two inverters also disconnect from the grid immediately.
– If one of the three inverters indicates a device fault and stops feeding in, the other two
inverters also disconnect from the grid 5 minutes later.
Local connection requirements
Select the respective setting and always observe the local connection requirements and
provisions of your utility operator.
To Next Page
Loading...
