What to do if Smanos L020 door/window contact is triggered but there is no alarm?
If your Smanos Security System's door/window contact is triggered but the control panel doesn't alarm, first verify that the system is in the armed state. Also, confirm that the door/window contact has been successfully paired with the control panel. Finally, ensure the door/window contact is not too far from the control panel.
Why Smanos L020 remote control does not work?
If your Smanos Security System remote control isn't working, first check if it has been successfully paired with the control panel. Also, make sure that the distance between the remote control and the control panel is not too far.
General| Wi-Fi | No |
|---|---|
| Alarm decibels | 105 dB |
| Operating frequency | 868, 915 MHz |
| Smartphone remote support | Yes |
| Operating temperature (T-T) | -10 - 55 °C |
| Mobile operating systems supported | Android, iOS |
| Number of simultaneously connected devices (max) | - |
| Input voltage | 12 V |
| Battery voltage | 1.5 V |
| Control type | Touch |
| Product color | White |
| Housing material | Acrylonitrile butadiene styrene (ABS) |
| Number of motion sensors | - pc(s) |
| Number of remote controls | 1 pc(s) |
| Number of door/window sensors | 2 pc(s) |
Details the functions and system status indicators of the remote control.
Explains the different zone types (Normal, Home, 24-H) for sensors.
Guidance on proper placement and mounting of door/window sensors.
Instructions for downloading and installing the L020 Alarm app.
How to bind the app with the alarm system and control it.
Steps for registering user accounts and pairing the app with the control panel.
Describes arming, disarming, and other remote control functions via the app.
How to extend accessories and rename sensors for easy identification.
Setup options for an optional wireless siren, including alarm function and tones.
Configuration of delay timers for arming and disarming the system.
Procedure for deleting all users from the control panel using its ID.
Instructions for adding new remote controls and sensors to the system.
Steps to pair an optional wireless siren with the control panel.
How to remove all paired sensors and remote controls from the system.
Procedure for deleting a paired wireless siren.
Information on RF exposure limits and safe operating distances.
To Next Page
