EasyManua.ls Logo

Smappee EV Wall - Page 15

Smappee EV Wall
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Smappee EV Wall Installation manual - English
15
Tools (not included)
Screwdrivers
3mm Hex screwdriver
7mm socket wrench with extension bar
Multimeter and earth ground meter
Wire stripper and cutter.
Needle-nose pliers.
Ferrules crimper, for stranded power supply cables
Drill and rock drill diameter 10 mm.
Hammer
RJ45 crimping tool
Supplies (included)
3 x wall plugs and screws anchors (Ø 6 mm x 50 mm)
3 x M4 x 6 mm HEX screws
Supplies (not included)
CAT 5/6 cable and two RJ45 connectors for wired communication cable.
Power supply cables
Ferrules (6 mm²), for stranded power supply cables
32 A circuit breaker

Other manuals for Smappee EV Wall