EasyManua.ls Logo

Smart Openers Smart Slider User Manual

Smart Openers Smart Slider
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Smart Slider
Sliding Gate Opener
WARNING: IT IS VITAL FOR THE SAFETY OF ALL
PERSONS INSTALLING AND USING THIS OPENER TO
FOLLOW THE INSTALLATION INSTRUCTIONS AND
SAFETY WARNINGS. FAILURE TO COMPLY MAY RESULT
IN SERIOUS PERSONAL INJURY AND/OR PROPERTY
DAMAGE AND FAILURE OF THE OPENER SYSTEM.
INSTALLATION MANUAL
Question and Answer IconNeed help?

Do you have a question about the Smart Openers Smart Slider and is the answer not in the manual?

Smart Openers Smart Slider Specifications

General IconGeneral
Operating Temperature-20°C to 60°C
Max Gate Weight600 lbs
Max Gate Length6 m
Operating Speed0.2 m/s
Remote Control Range30 m
Maximum Gate Weight600 lbs
Maximum Gate Width6 m
Control TypeRemote control, Keypad
Safety FeaturesObstruction detection

Summary

Safety and Product Overview

Important Safety Warnings

Crucial safety advice for installation and usage, preventing injury and damage.

Installation Essentials

General Installation Precautions

Emphasizes safety standards, site checks, and following instructions for installation.

Electrical Connection Guide

Single Leaf Gate Wiring

States the opener is prewired for single leaf gate setup.

Two Leaf Gate Wiring

Explains connecting two motors using a 5-core cable for master/slave operation.

Initial Operation and Navigation

Transmitter Operations

Coding Transmitters

Details coding up to 200 transmitters using the CODE button.

Hands Free Transmitter Coding

Explains coding transmitters without direct panel access.

Deleting Transmitters

Provides procedures for deleting single or all coded transmitters.

Gate Limit Configuration

Single Leaf Installation Hand

Sets up right or left-hand installation and motor configuration for single leaf gates.

Single Leaf Limits Setting

Guides on setting open and closed limits for single leaf gates.

Dual Leaf Motor Selection

Selects dual motor operation for limit setting on dual leaf gates.

Dual Leaf Limits Setting

Guides setting open and closed limits for dual leaf motors.

Advanced Feature Settings

Obstruction Margin Setting

Sets force sensitivity to detect obstructions for user safety.

Motor Speed and Delay Settings

Auto-Close and Hands-Free Features

Warranty and Liability Exclusions

Related product manuals