3). Press the
ON
OFF
key to power on, temperature
Imperial unit
reading shown on upper right of the LCD display will
automatically adjust according to ambient.
as following diagrams:
LCD display
Metric unit
LCD display
Environment
temperature
Imperial unit
LCD display
Environment
temperature
4). Setting measuring:
It is defaulted as MEA mode after power on (cable
TOP/
height measurement), press the
BOT
key to select
your required measuring mode that the defaulted mode
is BOT , which means measuring the height of the
most lower 6 cables.
Note:
Above LCD displayed reading are supposed data,
concretely please take your actual measured
reading as accuracy.
-09- -14-