SMART Board
®
Interactive Whiteboard
Basic Functionality
SMART Technologies
May 2012
Whenever a piece of technology gets moved, it’s a good idea to test it before use. It’s important to test your computer,
interactive whiteboard and projector to ensure they’re working properly when you turn everything on.
If your cursor appears a few inches away from your touch, orient the interactive whiteboard.
Orienting the SMART Board interactive whiteboard
Orientation tells the computer where the image of the desktop is being displayed on the surface of the interactive whiteboard.
It’s important to orient your interactive whiteboard after it’s been moved.
To orient a SMART Board 600 series interactive whiteboard
1. Press and hold the On-Screen Keyboard button and the Right-Click button simultaneously until the Orientation screen
appears
2. Begin at the upper-left corner of the Orientation screen. Press your nger or pen tool rmly on the center of each cross in
the order indicated by the white, diamond-shaped graphic.
NOTE: The point is registered when you remove your nger, not when you rst touch the Orientation screen.
To Next Page
General
